Elastix Recording Location to a different Hard Disk

1. Add the new formatted Hard disk.

2. Create a new mount point for the disk and make asterisk as the owner of that.

#mkdir /monitor

#chown -R asterisk:asterisk /monitor/

3. Create startup script. You can also use fstab for the same.

Edit /etc/rc.local and add the following line. Here  /dev/sdb1 is the first partition of newly attached hard disk.

/bin/mount /dev/sdb1 /monitor

4. Run the startup script.

#cd /etc

#./rc.local

5. Now if you run the below command you should see the hard disk mounted( /dev/sdb1             903G  2.9G  853G   1% /monitor).
# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/sda3             895G  2.8G  846G   1% /

/dev/sda1             487M   23M  439M   5% /boot

tmpfs                 2.0G     0  2.0G   0% /dev/shm

/dev/sdb1             903G  2.9G  853G   1% /monitor

6. Remove the monitor folder and link it to new location.

#rm -rf /var/spool/asterisk/monitor

#/bin/ln -s /monitor /var/spool/asterisk

7. Change Extension settings to enable recording in Elastix GUI and check if the files are saved in new location.

Advertisements

, , , , , , , ,

  1. #1 by Djmoutt on October 17, 2013 - 10:23 PM

    Exelente

  2. #2 by ronalds567 on February 12, 2017 - 11:51 PM

    Exelente, por si acaso no sabrías como agregar el segundo HD en el dashboard del elastix como para ver el porcentaje de uso del Disco?
    Saludos

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: